Let's see how you can connect DPD Local to ShippyPro in just few steps. 🔍
-3.gif)
Summary
1. Connection steps
To connect DPD Local you need to add your DPD Local credentials from Carriers > DPD Local logo.
2. Supported services
Select then the Service you're going to employ between:
- Parcel Next Day = 2^12
- Parcel Second Day = 2^11
- Parcel by 10:30 = 2^08
- Parcel by 12:00 = 2^13
- Classic = 2^19
- Direct = 2^80
- Expresspak 1 Next Day = 2^68
- Expresspak 5 Next Day = 2^32
- Parcel Saturday = 2^71
- Expresspak 1 by 10:30 = 2^04
- Expresspak 1 by 12:00 = 2^03
- Expresspak 5 by 10:30 = 2^28
- Expresspak 5 by 12:00 = 2^33
3. Specific requirements
Choose your Label Type:
- Citizen Printer: ZPL
- Eltron Printer: EPL
Zebra Printers are not supported by DPD Local, nor ZPL to PDF conversion. For this carrier is required an Official Citizen Printer.
it's not possible to display the Ebay marketplace order number on DPD Local shipping labels.
If you want, you can also enter a Custom Label to recognize the connection among all the others.
4. Errors & Troubleshooting
"ErrorMessage": "Invalid credentials"
In this case you'll need to contact DPD Local support in order to get API access.
As a first thing, find your local Depot by searching it from this link and adding your Zip Code, you'll then be able to reach DPD Local to activate your credentials.
Error Message: Maximum value exceeded consignment[0].totalWeight
Check with the courier to ensure that the total weight entered doesn't exceed the limit set for the selected shipping service.